Centimetre accuracy.
Every time.
RTK corrections and NTRIP network in Bosnia and Herzegovina
Real-time RTK corrections from our own network of base stations – for tractor autosteer, surveying, construction and drones. Connect your receiver and get RTK FIX (1–2 cm under open sky, up to ~30 km from a base) within seconds to a minute.
- bases online
- —
- GNSS constellations
- 4
- RTK accuracy
- 1–2 cm
- network monitoring
- 24/7
From satellite to your steering wheel – in real time
A base station at a precisely known position measures GNSS signal errors. Our NTRIP gateway sends those corrections to your receiver over the internet, and the receiver computes its position with centimetre accuracy.
Base station
A multi-frequency GNSS receiver on a point with known coordinates tracks GPS, GLONASS, Galileo and BeiDou and broadcasts RTCM 3 corrections every second.
RTK.ba NTRIP gateway
Authenticates your account, picks the nearest healthy base from your GGA position (AUTO) and forwards corrections – with automatic failover within seconds.
Your rover
A tractor terminal, survey rover, drone or phone receives corrections over mobile internet and holds RTK FIX – 1–2 cm precision.
See where you get RTK FIX
Base station status refreshes automatically. Each zone shows coverage around a base (~40 km); best accuracy and fastest FIX are within ~30 km.
Base stations: Prnjavor, Torine (Doboj), Šamac, Obarska and Udrigovo – coverage zone ~40 km; best accuracy within ~30 km. Base station locations are shown approximately (~1 km). Outside the coverage area? Tell us your location – the network is growing.
A professional network, no compromises
We don’t just sell corrections – we build infrastructure you can rely on in the middle of the season.
Centimetre accuracy
RTK FIX typically 1–2 cm horizontal and 2–3 cm vertical – repeatable season after season.
AUTO – nearest base
Connect to the AUTO mountpoint; based on your GGA position, the system picks the nearest healthy base station.
Automatic failover
If a base station goes down, the gateway switches you to the next nearest one within seconds – the rover stays connected and FIX recovers quickly.
Four constellations
RTCM 3.x MSM corrections for GPS, GLONASS, Galileo and BeiDou – faster FIX and stability near tree lines and power lines.
NTRIP v1 and v2
Works with receivers, modems and apps that support NTRIP and RTCM 3 MSM – from tractor terminals to phones.
24/7 monitoring
Every base station and the caster are monitored in real time; automated 24/7 monitoring with Telegram alerts on station outages.
Your control panel
View connections, usage, package expiry and invoices; renewals and support via tickets.
Secure access
Personal account per user/machine, 2FA for the panel, instant deactivation and access control.
Ready for modern tractors
McCormick, John Deere, Fendt, Case IH, New Holland, Claas… If your autosteer has an RTK licence and an NTRIP modem, you can be driving centimetre-accurate lines within minutes.
- Repeatable linesThe same AB lines year after year – seeding, spraying, inter-row cultivation and harvesting on the same line.
- Less overlap = lower costsSavings on seed, fertiliser, crop protection and fuel; less soil compaction.
- Work at night and in dustAutosteer holds the line when marker tracks can’t be seen – longer working shifts during the season.
- Ready for ISOBUS and variable ratePrecise positioning is the foundation for section control and VRA maps.
One network, many trades
Precision agriculture
Autosteer, seeding and planting on repeatable lines, controlled traffic farming (CTF), with no overlaps or skips.
Surveying & mapping
Surveying and stakeout with an RTK rover – no base station of your own, ready in the field straight away.
Construction
Machine control for excavators, graders and dozers; real-time monitoring of cut and fill.
Drones and GIS
RTK drones for photogrammetry and spraying with fewer ground control points (GCP); precise field mapping.
In the field in 4 steps
- 1Get in touch
Send an inquiry – your receiver/tractor type and location. We respond quickly and offer trial access.
- 2Get your account
A username and password for NTRIP and panel access, with a package tailored to your needs.
- 3Enter the settings
Enter the host, port, AUTO mountpoint and your account into the terminal/app. Enable GGA output.
- 4RTK FIX
Within seconds to a minute the receiver switches to FIX – drive, survey, build.
Everything about RTK, in one place
Guides for beginners and professionals – from GNSS basics to setting up tractor terminals.
What are RTK and GNSS
How centimetre-level positioning works, FIX vs FLOAT, baselines, constellations.
ReadTractors and autosteer
McCormick/Topcon, John Deere, Fendt, Case IH, New Holland, Trimble, AgOpenGPS.
ReadTroubleshooting
No FIX, 401, empty sourcetable, high age of corrections – what to check.
ReadOwn base stations? Use our software.
The same platform that runs RTK.ba: a smart NTRIP Gateway with AUTO nearest-base selection and automatic failover within seconds, admin/reseller/client roles, packages, credits, invoices, monitoring and white-label.
Frequently asked questions
A GNSS receiver that supports RTK and NTRIP (tractor autosteer, survey rover, drone or a module such as the u-blox F9P), an internet connection (a SIM card in the modem/terminal, or a phone) and an RTK.ba user account.
With an RTK FIX solution, typically 1–2 cm horizontal and 2–3 cm vertical. Accuracy depends on the distance to the base station (recommended up to ~30 km), sky visibility and antenna quality.
A smart mountpoint: your receiver sends its position (NMEA GGA), and the system automatically assigns you the nearest healthy base station – and switches you over if it stops working.
Very little – corrections are around 0.5–1 KB/s, roughly 2–4 MB per hour of operation. A standard mobile data plan is enough for the whole season.
Yes, if your autosteer has an RTK licence and supports NTRIP (via a built-in or external modem). The documentation has guides for McCormick/Topcon, John Deere, Fendt, Case IH/New Holland, Trimble and others.
Yes – get in touch via the contact form and we will set up trial access so you can check the FIX on your own field.
Through 1, 3, 6, 9 or 12-month packages. The flow is: pro-forma invoice → bank transfer to our company account → confirmation → invoice, and you can see your status and expiry date in your panel.
The most common causes are weak mobile signal, an obstructed sky view or the wrong mountpoint. See the “Troubleshooting” guide or open a ticket in the panel – we also monitor your connection from our side.
Ready for centimetre accuracy?
Tell us what you drive and where you work – we’ll suggest a package and set up trial access.